English

SYOJIN-Tools › 3D Print Cost Calculator

3D Print Cost Calculator: What Does One Print Really Cost?

Type the grams and print time from your slicer. Change any number to match your printer, filament and electricity price; the cost updates as you type.

This print

Filament and electricity

Printer wear, failures and your time

Your numbers stay in this browser. Nothing is sent.

Next tool

Advertisement

On this page
  1. How the cost is worked out
  2. Where to find each number
  3. How much electricity a 3D printer uses
  4. Pricing 3D prints to sell
  5. Summary

How the cost is worked out

PartFormula
Filamentgrams × spool price ÷ spool grams
Electricityaverage watts ÷ 1000 × hours × price per kWh
Printer wearhours × (printer price ÷ printer life in hours + upkeep per hour)
Failed prints(filament + electricity + wear) × failure %
Your timehours × your rate

Example: 50 g of PLA from a $20 / 1 kg spool is $1.00; 3 hours at 110 W and $0.17 per kWh is about $0.06; wear on a $600 printer over 5,000 hours plus $0.05 per hour upkeep is about $0.51. With 10% failures, the print costs about $1.72 before your time.

Where to find each number

  • Grams and time: your slicer shows both after slicing (the estimate for the whole plate). Calculating from an STL alone is not reliable, because infill, walls and supports change the grams a lot.
  • Electricity price: on your bill, the price per kWh (US average roughly $0.15 to $0.20, UK about £0.25, much of the EU €0.20 to €0.35).
  • Failures: 5% for a well-tuned printer and simple parts, 15 to 25% for tall, thin or new designs.
  • Upkeep: nozzles, build plates, belts and grease; $0.02 to $0.10 per hour is common for home printers.

Advertisement

How much electricity a 3D printer uses

Printing PLA, common desktop printers average roughly 80 to 125 W once warmed up; heating the bed and nozzle at the start draws several hundred watts for a minute or two. ABS and ASA need a hotter bed and often an enclosure, so they use more. Measurements differ between owners and rooms, so the best number is your own: a plug-in power meter shows the kWh for a whole print. Electricity is usually the smallest part of the cost.

Pricing 3D prints to sell

  • Always include your time: designing, slicing, removing supports and sanding often cost more than the filament.
  • Many sellers use a markup of 100 to 300% on the cost, or a minimum price per order, to cover packing, platform fees and returns.
  • Batch small parts on one plate and set "Pieces in this print": the cost per piece drops because the wear and your time are shared.

Summary

Type the grams and time from your slicer, then your filament, electricity and printer numbers: the calculator adds filament, electricity, wear, failed prints and your time, and gives a selling price with markup and a cost per piece. More maker tools: the cross stitch calculator and the Minecraft circle generator.

Advertisement