English

SYOJIN-Tools › Quilt Binding Calculator

Quilt Binding Calculator: How Many Strips and How Much Fabric

Type the quilt width and length in inches (or tap a common size), choose the strip width, and press Calculate.

Quilt size and strips

Next tool

Advertisement

On this page
  1. How the binding is worked out
  2. Binding chart for common quilt sizes
  3. Which strip width to cut
  4. Bias binding from a square
  5. Joining and finishing
  6. Summary

How the binding is worked out

  1. Length: add the four sides (2 x width + 2 x length) and about 12 inches for the corners and the final join.
  2. Strips: divide by the usable width of one strip. Strips are cut across the fabric (usually 42 inches wide after washing), and each diagonal join uses about one strip width, so a 2.5 inch strip gives about 39.5 usable inches. Round up.
  3. Fabric: multiply the number of strips by the strip width and round up to the next 1/8 yard (4.5 inches).

Example: a 60 x 70 inch throw needs 2 x 60 + 2 x 70 + 12 = 272 inches, which is 7 strips of 2.5 inches, 17.5 inches of fabric, so buy 1/2 yard (18 inches).

Binding chart for common quilt sizes

With 2.5 inch strips, 42 inch fabric and 12 inches extra. Quilt sizes vary between patterns, so use the calculator for your exact size.

QuiltSize (in)Binding lengthStrips (2.5 in)Fabric
Baby36 x 52188 in50.375 yd
Throw50 x 65242 in70.5 yd
Twin70 x 90332 in90.625 yd
Full85 x 108398 in110.875 yd
Queen90 x 108408 in110.875 yd
King108 x 108444 in120.875 yd

Advertisement

Which strip width to cut

Strip widthFinished binding (double fold)Good for
2 inabout 1/4 inThin batting, mini quilts, a narrow look
2.25 inabout 3/8 inMost cotton batting
2.5 inabout 3/8 to 1/2 inThe usual choice, and jelly roll strips
2.75 to 3 inabout 1/2 in or moreThick or wool batting, bed quilts that get heavy use

Bias binding from a square

Bias binding stretches around curves and scalloped edges and wears longer on the fold. Continuous bias is cut from one square: its area must equal the binding length times the strip width, so the side of the square is the square root of that. For a 272 inch binding with 2.5 inch strips, 272 x 2.5 = 680 square inches, so a 27 inch square (the calculator rounds up).

Joining and finishing

  • Join strips with a 45 degree seam and press it open, so the join does not make a lump on the fold.
  • Fold the strip in half lengthwise and press before sewing (double fold, or French, binding).
  • Leave a tail of about 8 inches at the start; the extra 12 inches in the calculation covers it and the mitered corners.

Summary

Binding length is the perimeter plus about 12 inches. Divide by about 39.5 inches per strip (for 2.5 inch strips from 42 inch fabric), round up, and buy strips x width, rounded up to the next 1/8 yard. For bias binding, cut a square whose side is the square root of length x strip width. Stitching too? Try the cross stitch calculator.

Advertisement