On this page
What you should hear
| Button | Correct | If not |
|---|---|---|
| Left | Only in your left ear | Heard on the right: headphones are on backwards, or left and right are swapped in a setting |
| Right | Only in your right ear | Heard in both: mono audio is switched on |
| Center | In the middle of your head | Pulled to one side: the balance is off or one side is weaker |
Left, right, left, right plays four short tones in turn (the left one lower, the right one higher) so you can check quickly without looking.
One side quiet or silent: what to check
- Balance and mono settings. Windows: Settings, System, Sound, your output device, then the Left and Right sliders, and turn Mono audio off. iPhone: Settings, Accessibility, Audio and Visual, Balance slider in the middle and Mono Audio off. Mac: System Settings, Accessibility, Audio. Android: Settings, Accessibility, Audio adjustment.
- The plug. A 3.5 mm plug not pushed fully in often plays one side only or sounds hollow. Clean the socket and the plug.
- Earbuds: wax on the mesh makes one side quiet; clean it gently. For wireless earbuds, put both back in the case, then reset or re-pair them.
- If one side stays silent on every device, the cable or that speaker is damaged.
Advertisement
Which is left and which is right?
Look for L and R printed inside the headband or on the stems; the left side often has a raised dot or the cable. Wearing them backwards swaps the stereo picture, which matters for games (footsteps from the wrong side) and films more than for most music.
Summary
Press Left and Right: each tone must play on that side only, and Center in the middle. If not, check the balance and mono settings, the plug and the ear tips. The same page has a bass sweep; see also the bass test and the mic test.