On this page
How to test your mouse for double clicking
- Click inside the box once, wait a moment, click again. Do this 30 to 50 times at a relaxed pace.
- If a single click shows two presses a few milliseconds apart, it turns red and counts under Made by itself.
- Test the problem button the way it fails for you: press and hold it for a second (a dropped drag shows up as a release and a new press), or click the right, middle or side buttons.
A fault often comes and goes, so one clean minute does not prove the switch is fine, but several red presses in a minute is a clear sign.
Why 80 ms?
A person double clicking on purpose leaves roughly 100 to 300 ms between presses, and even very fast clicking is rarely under 60 to 70 ms. A worn switch bounces much faster, usually under 30 ms. So anything below 80 ms is flagged. If you click very fast on purpose (for example in a click speed game), pick 50 ms; raise it only to catch slower ghost clicks.
| Gap between presses | Usually |
|---|---|
| under 30 ms | Switch bounce: the mouse made it, not you |
| 30 to 80 ms | Almost always the switch |
| 100 to 300 ms | A normal double click |
| over 500 ms | Two separate clicks (Windows' default double-click time is 500 ms) |
Advertisement
Why a mouse double clicks by itself
- A worn switch. The metal contacts inside the micro switch oxidise or the spring wears, so one press makes and breaks the contact twice. This is the cause in most mice after a year or two of heavy use.
- Static or dirt in the switch, especially in dry rooms.
- Software: a double-click speed set very slow in Windows or macOS, or a macro in the mouse app. If the test above stays clean but the problem continues on your computer, look here first.
How to fix it
- Check the warranty: many brands replace mice for double clicking within the warranty period.
- Unplug the mouse (and take out the battery), press the faulty button quickly 50 times, then try again; this can clear static for a while.
- Some mouse apps have a debounce setting; raising it hides the fault.
- Replace the switch (needs soldering) or the mouse. Optical switches do not wear this way.
Summary
Click the box once at a time for a minute. Presses closer than 80 ms show in red: that is your mouse double clicking by itself, almost always a worn switch. Every button is tested separately, and the gap of every press is shown. Testing the rest of your setup? Try the keyboard tester or the reaction time test.