English

SYOJIN-Tools › Minecraft › Minecraft Circle Generator

Minecraft Circle Generator: Numbered Block Chart for Any Size

Type the diameter in blocks, choose the thickness, and press Generate. For an oval, pick Ellipse and type the width and height.

Circle size

Next tool

Advertisement

On this page
  1. How to read the chart
  2. Radius, diameter and block counts
  3. Odd or even: where is the center?
  4. Building it with /fill commands
  5. Smoother circles with stairs and slabs
  6. What to build with circles
  7. Summary

How to read the chart

Each square is one block. The numbers along the top are columns and the numbers on the left are rows; the green number on the right of each row is how many blocks that row needs. The orange lines mark the middle. Start from the widest row, place it, then work outward one row at a time and count the blocks against the right-hand number. The table under the chart lists every row with the exact columns to fill, which is the fastest way to build without counting squares.

Radius, diameter and block counts

The diameter is the width across in blocks; the radius is half of it. Most players think in diameter because that is what you count in game. A circle drawn with a thin outline uses the blocks that touch the outside; filled uses every block inside.

DiameterRadiusOutline blocksFilled blocks
52.51221Chart
73.51637Chart
94.52469Chart
115.52897Chart
136.536137Chart
157.540177Chart
2110.556349Chart
2512.568489Chart
3115.584749Chart
4120.51121313Chart
5125.51442053Chart
64321803228Chart
10150.52848021Chart

A filled circle needs about 0.785 times the diameter squared (the area of a circle, pi times the radius squared). For walls, multiply the outline count by the wall height.

Advertisement

Odd or even: where is the center?

An odd diameter (21, 25, 31) has one center block, so it is easy to line up with a door, a beacon or a path. An even diameter (20, 24, 32) has a 2 by 2 center and looks slightly rounder at small sizes. If you are building around something one block wide, choose odd.

Building it with /fill commands

Open /fill commands under the chart, stand on the block where you want the center, face north, and paste the commands into chat or a command block. Each line fills one run of blocks in one row, relative to where you stand (~ means your position). Change stone to any block id, such as stone_bricks or glass. Commands need cheats or operator rights; on Bedrock the syntax is the same.

Smoother circles with stairs and slabs

Large circles look stepped on the diagonal parts. Builders smooth them by putting a stair or slab in the corner where two steps meet: look for places on the chart where a row jumps by one block and the next row jumps by one block again, and fill the inside corner. Use a thickness of 2 or 3 for walls so the steps never leave a gap you can see through.

What to build with circles

  • Towers: 7 to 15 blocks across, thickness 1, stacked as walls.
  • Round windows: 5 to 9 blocks, filled, then replace with glass.
  • Mountain bases and arenas: 41 to 101 blocks, thickness 2 or 3.
  • Domes and planets: use the sphere generator or the dome generator, which show one layer at a time.

Summary

Type the diameter, choose thin, thick or filled, and press Generate. Read the row numbers on the left and the block count on the right, or use the row table or /fill commands to build fast. Save the chart as a PNG or print it to keep beside you while you build.

Not an official Minecraft product. Not approved by or associated with Mojang or Microsoft.

Advertisement