On this page
How to work out the size of a cross stitch
The count of a fabric is how many stitches fit in one inch. So the finished size is simply stitches ÷ count. A design 140 stitches wide on 14 count Aida is 140 ÷ 14 = 10 inches wide. For centimeters, multiply the inches by 2.54. Add your margin on both sides and you have the size to cut.
The calculator rounds the cut size up to the next half inch, because it is easy to trim fabric and impossible to add it back.
Sizes on Aida 11, 14, 16 and 18
A higher count means smaller stitches and a smaller finished piece. Here are common pattern sizes without margins:
| Stitches | Aida 11 | Aida 14 | Aida 16 | Aida 18 |
|---|---|---|---|---|
| 100 x 100 | 9.1 x 9.1 in | 7.1 x 7.1 in | 6.3 x 6.3 in | 5.6 x 5.6 in |
| 140 x 100 | 12.7 x 9.1 in | 10.0 x 7.1 in | 8.8 x 6.3 in | 7.8 x 5.6 in |
| 200 x 150 | 18.2 x 13.6 in | 14.3 x 10.7 in | 12.5 x 9.4 in | 11.1 x 8.3 in |
| 250 x 250 | 22.7 x 22.7 in | 17.9 x 17.9 in | 15.6 x 15.6 in | 13.9 x 13.9 in |
14 count is the usual starting point: big enough to see the holes, small enough for detail. 11 count is easiest on the eyes and good for children; 16 and 18 count give finer detail and need a smaller needle (size 26 or 28).
Advertisement
Evenweave and linen: stitching over 2
Evenweave and linen are counted in threads, and you usually stitch over 2 threads. That halves the count: 28 count linen over 2 gives 14 stitches per inch, the same size as 14 count Aida; 32 count over 2 matches 16 count. Pick "28 over 2" or "32 over 2" in the calculator and it does this for you.
How much extra fabric to leave
- 2 inches (5 cm) each side: small pieces you will turn into ornaments, cards or patches.
- 3 inches (7.5 cm) each side: the usual choice, room for a hoop and for framing.
- 4 inches (10 cm) each side: large pieces, professional framing, or a scroll frame that needs fabric to grip.
The calculator also suggests a hoop that fits the whole design with about an inch to spare. If the design is bigger than a 14 inch hoop, use a scroll frame or Q-snaps and move it as you go.
How much floss you need
Most patterns list how many stitches use each color. Type that number and the calculator estimates the floss for full cross stitches with 2 strands, including tails and waste. One skein of stranded cotton is 8 meters of 6 strands, so it gives about 24 meters of 2 strand thread. On 14 count that is roughly 2,000 stitches per skein; on 18 count, more; on 11 count, fewer. Buy one extra skein of the main colors so the dye lot matches.
Summary
Divide the stitch count by the fabric count to get inches, add a margin of 2 to 4 inches on each side, and round up. Over 2 on evenweave halves the count. Use the table to compare fabrics before you buy, and type the stitches per color for a floss estimate. Quilting too? Try the quilt binding calculator.